Top

Hand Tools

Wire/Pipe Locating Device

Where to find Wire Pipe Locating Device in Burnsville

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: Tempo

Model: 501 T

4 Hour: $39.00

Daily: $72.00

Weekly: $215.00

Quantity: for a period of  
4 hour(s)   day(s)   week(s)  


  • With its inductive signal detection, the TEMPO Communications Tracker II (501) can be used on active or dead systems. Now you can trace the path and determine the depth of buried wires, cables, and metallic pipes or conduit and find the ends of a cut cable without having to deactivate the systems.
  • Features:
  • Trace the path and determine the depth of buried conductors
  • Use on active or dead systems
  • Transmitter output and receiver sensitivity are both fully adjustable for maximum accuracy
  • The lightweight receiver provides both audible and visual indications of signal strength for accurate identification
  • The transmitter offers three methods of connection: direct, inductive coupler, or inductive antenna
  • Inductive coupler clamps around the wire or pipe for use on active lines, or where isolating the line is not an option
  • Inductive antenna is built into the case housing and allows the transmitter to be placed on the ground over the wire path to radiate a signal down onto the conductor
  • Traces over distances to 4,000 feet (1.2 km) and depths to 7 feet (2.2 m)
  • Adjustable sensitivity and transmitter power
  • Includes transmitter assembly, receiver assembly, inductive coupler (clamp), inductive antenna (built-in), two 8 foot (2.4 m) test leads with heavy-duty alligator clips, and a durable polyethylene case
  • Battery-operated (8 - AA and 1 - 9V included)
  • Power Source:
  • Transmitter: Eight AA batteries
  • Receiver: One 9V battery
  • Battery Life: Transmitter 30 hours, receiver 10 hours nominal 447.5KHz
  • Transmitter Frequency: 447.5KHz
  • Transmitter Power: 40Vp-p (140mW) maximum
  • Voltage Protection: 240VAC, 500VDC
  • Automatic Shut-off: 90 min. transmitter & receiver
  • Construction:
  • Transmitter/Receiver: Powder coated aluminum
  • Case: Vacuum formed polyethylene
  • Dimensions:
  • Transmitter: 4.25 x 3 x 3.25
  • Receiver: 32 x 2.75 x 4
  • Case: 33.5 x 8.25 x 3.75
  • Weight: 6.7 lbs. (complete kit)
* Prices are subject to change.
* Please call us if you have questions about our wire/pipe locating device rentals in Burnsville, Rosemount, Apple Valley, Minneapolis, St Paul, Twin Cities, South Metro, and Dakota County MN.